To Reset Moved and Removed Bars in a Set or System

Learn how to reset a moved bar to its original position in a rebar set or a path or area reinforcement system.

To reset a moved bar to its original position in a set or system:

1. Select a rebar set or a path or area reinforcement system.
2. In the Modify | Structural Rebar tab Customization panel, click (Edit Bars).
3. Select the moved bar.
4. In the à Modify | Structural Rebar tab Customization panel, click (Reset Position).

To reset all the moved or removed bars in the set or system:

1. Select the set.
2. In the Modify | Structural Rebar tab Customization panel, click (Edit Bars).
3. Select the moved bar.
4. In the à Modify | Structural Rebar tab Customization panel, click (Reset All).

To show the removed bars:

1. In the Modify | Structural Rebar tab Customization panel, click (Edit Bars).
2. In the Modify | Edit Bars tab Mode panel, click (Show Removed).

Note: To reset only some of the bars, just select them in this mode and click (Finish) to save and apply your changes, or switch to (Modify Bars) in the Modify | Edit Bars tab Mode panel. The bars selected are maintained in the set or system, the deselected bars are removed from the set or system.

This option is similar to (Select Rebars in Rebar Set to Show) in the Modify | Structural Rebar tab Presentation panel.