Use this dialog box to view and change underground storage-related settings.
This topic documents settings in all underground storage-related Edit Settings dialog boxes (drawing-level, feature-level, and command-level).
- Drawing-level ambient settings are identified by the
drawing icon.
- Underground storage feature settings are listed near the top of this dialog box, after the General property group, and are identified by the
underground storage icon.
- Underground storage command settings are identified by the
command icon.
For general information about drawing, feature, and command settings and their interaction, see About Autodesk Civil 3D Settings.
For information about drawing-level ambient settings, see Ambient Settings Tab (Drawing Settings Dialog Box).
Default Styles
Use these settings to specify the default styles assigned to underground storage.
- Underground Storage Style
- Specifies the underground storage style for underground storage creation. Click in the Value column, and click
to select a style in the
Underground Storage Style dialog box.
Default Name Format
Use these settings to specify default name formats.
- Underground Storage Name Template
- Use these settings to specify the default name formats for ponds. Click in the Value column, and click
to make changes in the
Name Template dialog box.
- Infiltration
- Use these settings to specify default feature line extraction settings for underground storage.
- Enable Infiltration
- Enables the infiltration process for underground storage on creation.
- Infiltration Type
- Specifies what the default infiltration to consider. Either Bottom and side, Bottom, or Side.
- Bottom Infiltration Rate
- Specifies the default rate of infiltration through the bottom of the filter area.
- Side Infiltration Rate
- Specifies the default rate of infiltration through the sides of the filter area.
- Safety Factor
- Specifies the default reduction in infiltration rate to account for silting or poor maintenance.