Select Clash Test Options

There are four default clash test types for you to choose from:

To select the clash test options:

  1. Click Home tab > Tools panel > Clash Detective .

  2. In the Selection area, use the Settings area to select the test you want to run from the Type drop-down list. Any custom clash tests that have been defined (see Create Custom Clash Tests) appear at the end of the list.

  3. Enter the Tolerance required, which will be automatically converted to the Display Units. See Clash Detective Terminology for more information.

  4. If you want to run a time-based or soft clash test, select the appropriate option in the Link box. For example, selecting TimeLiner will make Clash Detective produce a clash report based on the Clash Detective settings, TimeLiner simulation settings, and the project data contained in TimeLiner. For more information and usage examples, see Time-Based and Soft Clash Testing.

  5. Use the Step option to control the Interval Size to use when looking for clashes in a simulation sequence. This option is only available when you have made a selection in the Link drop-down menu.

  6. Check the Composite Object Clashing check box to include clash results that may be found in the same composite object, or a pair of composite objects.

    A composite object is a group of geometry that is considered a single object in the Selection Tree. For example, a window object might be composed of a frame and a pane, or a cavity wall may be made of several layers.