Modifying Duct Systems

You can adjust the layout for ductwork in a duct system.

When a section of ductwork is selected in a view, the following tools are available from the Modify | Duct, or Multi-Select tab:

Duct/Pipe Sizing: opens the Duct Sizing.
Routing Solutions: places tools on the ribbon that let you select a routing solution that can be used to modify the selected ductwork.

Topics in this section

System Editor
System Editing Tools are available when a system is selected.
Video: Divide MEP Systems
Dividing MEP systems may improve system performance in Revit.
Video: Add Insulation and Lining to Duct
Use the Modify Duct panel to add insulation and lining to a segment of duct, or to the entire run.
Disconnect Equipment
Use this tool to disconnect equipment assigned as source equipment to a duct system.
Connect a Component into a Duct System
Use Connect Into - Duct/Pipe to automatically add a component to a system and create ductwork between the new component and the existing system.
Divide Systems
Use the Divide System command to create individual systems from a duct or pipe system consisting of multiple physical networks. Dividing systems may improve performance.
Justify Duct
Use the justification editor to align the tops, bottoms, or sides of ductwork in a section of the system.
Change Routing Solutions
You can adjust the routing for the ductwork in an existing duct system.
Change the Type for a Run
You can change the type for a multi-selection run of duct, pipe, cable tray, or conduit.
Add Insulation and Lining to Duct
You can add insulation and lining to duct.

Parent topic: Mechanical Systems