Adding Design Options

A design option is one possible solution for a particular design issue. Each design option set contains one primary option and one or more secondary options. When you create a set, Vasari also creates a primary option, which you must edit to add its elements. (See Editing a Design Option.) Use the following procedure to add secondary design options.

To add a design option

1. Click Analyze tabDesign Options panel (Design Options).
2. In the Design Options dialog, in the left-hand list, select the design option set to which you want to add an option.
3. Under Option, click New.

   The default option name displays under the option set.

4. To rename the option, select the option name, and under Option, click Rename. Enter a name, and click OK.
   
5. If you want this design option to be the primary option for the design set, click Make Primary.

   The Make Primary button promotes a secondary option to the primary option. The former primary option becomes a secondary option.

   Note: Use caution with Make Primary, because references from the main model to the former primary option can be lost. After using Make Primary, check dimension references and tags to be sure they are referencing the correct elements. See Referencing Elements in Design Options.
6. To open the design option for editing, do the following:
   1. Select the design option in the list, and click Edit Selected.
   2. Click Close.

   In the current view, elements in the main model display in halftone to distinguish them from the design option that you are editing. For further instructions, see Editing a Design Option.

   Tip: If the current view does not show the active option, check its design option settings. (See Checking the Design Option Settings for a View.) For the appropriate design option set, specify Automatic, or select the desired design option.