Select a pond in the Grading Objects Browser or in the Visualisation Display to open this properties panel. Use this dialog to modify the constraints for individual ponds.
Specifies the display name of the pond.
Specifies the kind of pond, either Dry Pond or Wet Pond. Pond type affects the optimisation constraint properties available.
Specifies the minimum storage volume constraint for the pond.
Specifies a maximum storage depth constraint for the pond. This depth is measured from the freeboard depth to the bottom of a dry pond or the permanent pool of a wet pond.
Specifies if Grading Optimization adjusts the existing pond boundaries. Otherwise, the pond boundaries will be affected by optimisation.
Accounts for a safety bench in the pond grading and enables safety bench constraint properties.
Specifies the interior to exterior width of the raised benching.
Specifies the freeboard depth from the top of benching.
Specifies the slope ratio from the benching (or Safety Bench if applied) to the next slope.
Specifies where the safety bench will begin. It is measured from the freeboard depth.
Specifies the width of the safety bench.
Specifies the slope percentage of the safety bench from the starting depth to the extent of its width.
Specifies the required water depth for the permanent pool. It is the depth of water below the freeboard and storage volume.
Specifies the width of the aquatic bench in the permanent pool.
Specifies the slope ratio of the aquatic bench from the safety bench to the extent of its width.
Specifies the colour of the representative point, line segments or areas of the grading object in the visualisation display.
Enables the grading object to be included in the optimisation. When unselected, it is ignored.
Enables the grading object to be seen in the visualisation display. When unselected, it is hidden but still active.