Cut Order

Displays the cut order for confirmation or editing. To access this feature, click Profiler Cut Order.

The Cut Order numbers are each displayed in a green box, as shown above. As the cursor is moved over an island lead in, the Cut Order box is highlighted red.

To re-order the islands starting from 1:

1. Click over the required Lead In position.

   The number 1 is surrounded by a white box.

2. Move to each island in turn and click.

   Inner and center line islands should be processed before the outer island.

3. If you make a mistake, or only need to re-order from a particular island, click on the Island "Cut No" that you wish the new sequence to start from, and then right-click.

   All of the islands up to this number will be highlighted in white. Higher numbers will be highlighted in green.

4. Click on the next island required in the sequence.
5. If using multiple tools, it is recommended that all islands processed by the same tool are located together.