The geometry requirements (parameters) for a male threaded connector are listed below. The specification used in this example is “ASME B1.20.1”.
| Parameter (Dimension) | Value |
| Diameter | Should be set according to catalog. |
| Extension | = 0 |
| Snap Offset | = L2*2 |
| Body Thickness |
=0.9 x Outside Diameter = -Diameter/10 |
| Body Length | = -L2 |
| Body Set Back | = 0 |
| Swage Set Back | = 0 |
| Swage Length | = 0 |