Male Non-Threaded Connector

The geometry requirements (parameters) for a male non-threaded connector are listed below. The specification used in this example is “ASME B1.20.1”.

Note: All male connectors, except for male threaded connectors, will be created in only one way, which will be defined with a Diameter of 999 without any other data. Some common male connection types are Grooved, FTG, Spigot, Plain End, and Butt Welded.

Parameter (Dimension)	Value
Diameter	999
Extension	= 0
Snap Offset	= 0
Body Thickness	= 0
Body Length	= 0
Body Set Back	= 0
Swage Set Back	= 0
Swage Length	= 0