import adsk.core, adsk.fusion, traceback def run(context): ui = None try: app = adsk.core.Application.get() ui = app.userInterface # Create a document. doc = app.documents.add(adsk.core.DocumentTypes.FusionDesignDocumentType) product = app.activeProduct design = adsk.fusion.Design.cast(product) # Get the root component of the active design rootComp = design.rootComponent # Create a sub component under root component allOccs = rootComp.occurrences transform = adsk.core.Matrix3D.create() subOcc = allOccs.addNewComponent(transform) # Create an extrude in the sub component subComp = subOcc.component sketches = subComp.sketches sketch = sketches.add(subComp.xZConstructionPlane) sketchCircles = sketch.sketchCurves.sketchCircles centerPoint = adsk.core.Point3D.create(0, 0, 0) sketchCircles.addByCenterRadius(centerPoint, 2.5) profile = sketch.profiles.item(0) extrudes = subComp.features.extrudeFeatures extInput = extrudes.createInput(profile, adsk.fusion.FeatureOperations.NewBodyFeatureOperation) distance = adsk.core.ValueInput.createByString("50 mm") extInput.setDistanceExtent(False, distance) extInput.isSolid = True extrude = extrudes.add(extInput) endFaceOfExtrude = extrude.endFaces.item(0) # Create the joint geometry jointGeometry = adsk.fusion.JointGeometry.createByPlanarFace(endFaceOfExtrude, None, adsk.fusion.JointKeyPointTypes.CenterKeyPoint) # Create the JointOriginInput jointOrigins_ = subComp.jointOrigins jointOriginInput = jointOrigins_.createInput(jointGeometry) # Create the JointOrigin jointOrigins_.add(jointOriginInput) camera_ = app.activeViewport.camera camera_.isFitView = True app.activeViewport.camera = camera_ except: if ui: ui.messageBox('Failed:\n{}'.format(traceback.format_exc()))
#include <Core/Application/Application.h> #include <Core/Application/Documents.h> #include <Core/Application/Document.h> #include <Core/Application/Product.h> #include <Core/Application/ValueInput.h> #include <Core/Application/Viewport.h> #include <Core/Application/Camera.h> #include <Core/Geometry/Point3D.h> #include <Core/UserInterface/UserInterface.h> #include <Fusion/Fusion/Design.h> #include <Fusion/BRep/BRepFace.h> #include <Fusion/BRep/BRepFaces.h> #include <Fusion/Construction/ConstructionPlane.h> #include <Fusion/Components/Component.h> #include <Fusion/Components/JointOrigins.h> #include <Fusion/Components/JointOriginInput.h> #include <Fusion/Components/JointOrigin.h> #include <Fusion/Components/JointGeometry.h> #include <Fusion/Features/Features.h> #include <Fusion/Features/ExtrudeFeature.h> #include <Fusion/Features/ExtrudeFeatures.h> #include <Fusion/Features/ExtrudeFeatureInput.h> #include <Fusion/Sketch/Profile.h> #include <Fusion/Sketch/Profiles.h> #include <Fusion/Sketch/Sketch.h> #include <Fusion/Sketch/Sketches.h> #include <Fusion/Sketch/SketchCircle.h> #include <Fusion/Sketch/SketchCircles.h> #include <Fusion/Sketch/SketchCurves.h> #include <Fusion/Sketch/SketchPoint.h> #include <Fusion/Sketch/SketchPoints.h> using namespace adsk::core; using namespace adsk::fusion; Ptr<UserInterface> ui; extern "C" XI_EXPORT bool run(const char* context) { Ptr<Application> app = Application::get(); if (!app) return false; ui = app->userInterface(); if (!ui) return false; Ptr<Documents> documents = app->documents(); if (!documents) return false; Ptr<Document> doc = documents->add(DocumentTypes::FusionDesignDocumentType); if (!doc) return false; Ptr<Product> product = app->activeProduct(); if (!product) return false; Ptr<Design> design = product; if (!design) return false; // Get the root component of the active design Ptr<Component> rootComp = design->rootComponent(); if (!rootComp) return false; // Create sketch in root component Ptr<Sketches> sketches = rootComp->sketches(); if (!sketches) return false; Ptr<ConstructionPlane> xz = rootComp->xZConstructionPlane(); if (!xz) return false; Ptr<Sketch> sketch = sketches->add(xz); if (!sketch) return false; Ptr<SketchPoints> sketchPts = sketch->sketchPoints(); if (!sketchPts) return false; Ptr<Point3D> point = Point3D::create(1, 0, 1); if (!point) return false; Ptr<SketchPoint> sketchPt = sketchPts->add(point); if (!sketchPt) return false; Ptr<SketchCurves> sketchCurves = sketch->sketchCurves(); if (!sketchCurves) return false; Ptr<SketchCircles> sketchCircles = sketchCurves->sketchCircles(); if (!sketchCircles) return false; Ptr<Point3D> centerPoint = Point3D::create(0, 0, 0); if (!centerPoint) return false; Ptr<SketchCircle> circle = sketchCircles->addByCenterRadius(centerPoint, 2.5); if (!circle) return false; // Get the profile defined by the circle Ptr<Profiles> profs = sketch->profiles(); if (!profs) return false; Ptr<Profile> profile = profs->item(0); if (!profile) return false; // Create an extrude input and make sure it's in a new component Ptr<Features> feats = rootComp->features(); if (!feats) return false; Ptr<ExtrudeFeatures> extrudes = feats->extrudeFeatures(); if (!extrudes) return false; Ptr<ExtrudeFeatureInput> extInput = extrudes->createInput(profile, FeatureOperations::NewComponentFeatureOperation); if (!extInput) return false; // Set the extrude input Ptr<ValueInput> distance = ValueInput::createByString("50 mm"); if (!distance) return false; extInput->setDistanceExtent(false, distance); extInput->isSolid(true); // Create the extrude Ptr<ExtrudeFeature> ext = extrudes->add(extInput); if (!ext) return false; // Get the end face of the created extrude Ptr<BRepFaces> endFaces = ext->endFaces(); if (!endFaces) return false; Ptr<BRepFace> endFace = endFaces->item(0); if (!endFace) return false; // Create the joint geometry Ptr<JointGeometry> jointGeometry = JointGeometry::createByPlanarFace(endFace, nullptr, CenterKeyPoint); if (!jointGeometry) return false; // Create JointOrigininput Ptr<JointOrigins> jointOrigs = rootComp->jointOrigins(); if (!jointOrigs) return false; Ptr<JointOriginInput> jointOriginInput = jointOrigs->createInput(jointGeometry); if (!jointOriginInput) return false; // Create the JointOrigin Ptr<JointOrigin> jointOrigin = jointOrigs->add(jointOriginInput); if (!jointOrigin) return false; // Fit to window Ptr<Viewport> viewPort = app->activeViewport(); if (!viewPort) return false; Ptr<Camera> cam = viewPort->camera(); if (!cam) return false; cam->isFitView(true); viewPort->camera(cam); return true; } #ifdef XI_WIN #include <windows.h> BOOL APIENTRY DllMain(HMODULE hmodule, DWORD reason, LPVOID reserved) { switch (reason) { case DLL_PROCESS_ATTACH: case DLL_THREAD_ATTACH: case DLL_THREAD_DETACH: case DLL_PROCESS_DETACH: break; } return TRUE; } #endif // XI_WIN