The valid keyword card names for an AdditiveFEADeckBuilderCard in an AdditiveFEADeckBuilder. Any cards not in this enum can still be made using createGenericCard.
Defined in namespace "adsk::cam" and the header file is <Cam\CamTypeDefs.h>
| Name | Value | Description |
| AdaptivityCard | 11 | The *ADAP card sets the number of adaptive mesh levels. |
| AmbientTemperatureCard | 3 | The *AMBI card sets the ambient temperature. |
| AnalysisTypeCard | 12 | The *ANTP card sets the analysis type as one of the AdditiveFEAAnalysisType enum values. |
| AutomaticMeshingCard | 29 | The *AUTM card automatically generates an input mesh for moving-source analyses, including PRM generation. |
| AutomaticTimingCard | 25 | The *TAUT card automates time incrementation based on the heat source radius. |
| BinaryOutputCard | 13 | The *BINA card enables binary file format output from a thermal model to be used by a subsequent mechanical model. |
| BuildPlateXYExtensionCard | 10 | The *SBXY card sets the extension of the build plate in the x and y directions relative to the overall parts bounding box. |
| BuildPlateZBoundsCard | 5 | The *DDM! card sets the top and bottom z bounds of the build plate. |
| CoarseningGenerationsCard | 17 | The *PBLR card sets the number of coarsening generations. |
| ConvectionCard | 7 | The *CONV card sets the temperature-dependent convection coefficients. |
| DiskCheckCard | 26 | The *IOBN card enables or disables the disk check that occurs at the beginning of each simulation. |
| EndCard | 18 | The *END card marks the end of the input file deck. |
| EnsightOutputCard | 14 | The *ENSI card enables Ensight gold case file output. |
| EvaporationTemperatureCard | 33 | The *EVAP card specifies the evaporation temperature for the deposited material. |
| FinalTemperatureCard | 4 | The *FINT card sets the final temperature. |
| FineLayerCountCard | 24 | The *ADP1 card controls the number of fine layers beneath the deposition when coarsening. |
| GoldakCard | 27 | The *GOLD card defines the shape of the heat source for Goldak's double ellipsoid model. |
| IncludeCard | 44 | The *INCL card includes the contents of another file, e.g. a list of STL files and their STL map data (see STLsCard and STLMapCard) that is not yet known when the deck is built, such as support STL files generated during toolpath generation. |
| IncrementOffsetCard | 41 | The *IOFF card defines the time increment offset. |
| InitialTemperatureCard | 32 | The *INIT card sets the initial temperature. |
| LaserPathGenerationCard | 20 | The *LSRP card creates a laser path in a rectangular patch for PRM generation. |
| LayersPerElementCard | 2 | The *PBPA card sets the number of layers per element. |
| MaterialCard | 19 | The *MATE card defines material properties. |
| MaxRefinementLevelCard | 39 | The *MAXR card defines the max number of triangle refinement levels for triangle mesh warping or result interpolation. |
| MechanicalRelaxationCard | 37 | The *RELM card defines parameters for numerical relaxation, similar to *RELA, but only for the mechanical analysis. |
| NewPRMGenerationMethodCard | 31 | The *NAPL card enables the new method of PRM generation, in which faces remain free at the last time increment. |
| NoOffCoreCard | 15 | The *NOFC card disables off-core memory management. |
| OnCore1Card | 16 | The *OFC1 card enables on-core level 1 memory management. |
| OutputFileFrequencyCard | 35 | The *OWFC card sets the output file write frequency for PRM generation. |
| PanzipCard | 43 | The *PZPD card discretizes and compresses results during simulation. |
| PowderBedYSymmetryCard | 30 | The *PBSY card sets symmetry boundary conditions on the y-axis sides of the substrate. |
| PowderCard | 28 | The *DDMP card enables powder modeling for moving-source simulations. |
| PowderTypeCard | 23 | The *PTYP card sets the powder material type as one of the AdditiveFEAPowderType enum values. |
| PRMsCard | 8 | The *PBPF card sets the list of PRM file names. Currently only one PRM file is supported by this API. |
| PropertyScalingCard | 22 | The *DDM1 card defines material property scaling factors for quiet elements and powder elements. |
| RelaxationCard | 34 | The *RELA card defines parameters for numerical relaxation of the Newton-Raphson method for stability and improved convergence. |
| SolutionParametersCard | 36 | The *SOLU card defines the convergence criteria for the Newton-Raphson method. |
| STLIndexCard | 40 | The *ISTL card defines which STL, as listed in the STLsCard, is to be warped or interpolated. |
| STLMapCard | 6 | The *STLM card maps STL files to configurations, PRMs, materials, and volume fractions. |
| STLsCard | 9 | The *STLF card sets the list of STL files. |
| STLToleranceCard | 1 | The *STOL card sets the STL gap tolerance. |
| TitleCard | 0 | The *TITL card sets the title. |
| TransientCard | 21 | The *TRAN card defines transient analysis timing control. |
| WarpCard | 38 | The *WARP card defines the warpage magnification factor for triangle mesh warping, e.g. +1.0 for warpage or -1.0 for unrelaxed compensation. |
| WarpInputCard | 42 | The *INPU card defines the FEA input for a warp operation. |