Add net or bus labels

  1. On the Schematic Design toolbar, click Label Label icon.
  2. In the Label dialog, turn Xref on if the net goes to another schematic sheet, and you want the label to record the location of the connection point.
  3. Click the net or bus in the approximate location of the label. The label appears beside the cursor.
  4. Optionally move the label location, and right-click if you want to rotate the label 90 degrees counterclockwise with each click.
  5. Click to place the label.
  6. Click another net location that you want to label, or press Esc to end the labeling session.
Parent page: Schematic design tools