Simulate

Some prerequisites are required before using the Simulate command.

  1. Create a schematic using components from ngspice-digital and ngspice-simulation libraries. These components are already mapped to SPICE models, which is required for accurate simulations.
  2. Assign appropriate values for resistance, capacitance, etc. to the devices in your schematic. Add a Voltage Probe or Phase Probe in a suitable place for your simulation.
  3. On the Schematic Design toolbar, click Simulate > Add Model, and in the AddModel dialog, map SPICE models to any parts not already mapped.
  4. Click Simulate Simulate icon.
  5. In the Simulation dialog, select the simulation type: Operating Point, DC Sweep, AC Sweep, or Transient.
  6. Set any other values for the simulation type, then click the Simulate button.