Place via

  1. In the 2D PCB workspace, click Route > Via Via icon.

  2. In the VIA dialog, set the properties for each via:

    • Via Length: Choose a via length from the list.
    • Pad Shape: Choose from square, round, or octagon.
    • Dimensions: Use auto to set default values. Set custom dimensions or choose dimensions from the list.
  3. Apply Solder Mask.

    • Auto: Use the default solder mask values specified in Design Preferences.
    • Off: Disable solder mask openings. The solder mask will cover the via entirely.
    • Offset: Set a custom size or choose a size from the list. If the custom values exceed Design Preferences limits, they will automatically adjust to the allowed limits.
  4. Use the cursor to place the vias. If any selected location violates design rules, the via is automatically moved to the nearest acceptable location.

  5. Click Done to finish placing vias.