To edit railway styles

When modifying railway styles, map the overall style to a Material Group. A material group applies a combination of railway components to a single railway. Material groups can vary the railway appearance when the feature passes through a tunnel or over a bridge.

1. Click Manage Content (Style Palette).

2. Display the style to edit.

   • On the left side of the Style Palette, click the Railway tab.
   • Select the style to edit.

3. Click to duplicate an existing style before editing it.

   • It is good practice to copy an existing style instead of changing the original version.

4. Double-click the new copy of the style to edit its properties.

   You can also select the style and click Edit the Properties of the Selected Style.

   

5. Under General Settings, specify the following:

   Setting	Description
   Railway Type	Select Railway, Bridge, or Tunnel.
   #Tracks	Changing the number of tracks updates the preview. This is a default value, which is replaced by any actual value for a particular feature when you apply the style.
   Track Spacing	This setting affects only styles with multiple tracks (#Tracks = 2 or more). You can see the spacing adjustment in the preview.
   Transition Zone	Defines the distance in which the terrain blends into either side of the railway. For example, with a transition zone of 9m, there is a 9m corridor to the left and to the right of the railway, where the terrain changes from its original height to the height of the railway. The larger the transition zone, the more gradual the terrain adjustment.
   Material Group	The collection of materials and associated categories that map a material to the different parts of a railway style. You can define each component of the material group separately, from within its catalog. See Edit Styles.
   Decorations	You can add vehicles, vegetation, or other 3D objects as decorations on any single track of a railway. The style places 3D models relative to the centerline of the specified tracks. Decorations are automatically adjusted to avoid intersections.
   Custom Profiles	You can add 2D profiles that smoothly follow the path of a single railway track you specify. Custom profiles use 2D cross-sections in SDF or SQLite format to create and display shapes such as guardrails, fences, or barriers.

6. Under Structural Settings, specify the following:

   

   1. Railbed
   2. Ballast
   3. Ballast Run
   4. Ballast Width
   5. Sleeper
   6. Sleeper Width
   7. Sleeper Length
   8. Track Spacing
   9. Railbed Cess
   10. Railbed Run

   Setting	Description
   Rail Settings	Specify the measurements for the flange, rail height, and rail gauge. Indicate whether the rails are flush to the ground (no sleepers) or not. The flange must be set lower than half the sleeper's length, and the rail gauge must be lower than the sleeper's length.
   Sleeper Settings	Specify the measurements for the sleeper width (perpendicular to the tracks), length, height, and spacing. Sleepers are called railroad ties in the United States.
   Ballast Settings	Specify the measurements for the ballast area (the material between the sleepers). Specify the width, rise, and run of the ballast.
   Railbed Settings	Specify the measurements for the railbed area (the surface on which the railway sits). Specify the cess, rise, run and subgrade of the railbed. The cess is the part of the railbed outside the ballast area. It can be used as an area for workers to stand when trains go by, if it is wide enough. The run cannot be greater than 70 degrees. The subgrade allows you to define the railbed width in a trough by modifying the height transition between the original terrain height and the grading width for the railway.

7. Under Main Materials, specify the materials to use for the rail, sleeper, ballast, railbed, and road intersection areas.

8. If you are editing a railway bridge style, under Bridge Settings, specify the thickness of the bridge wall, the material for the bridge bottom and sides, and the width, depth, spacing, and material for the pylons.

9. If you are editing a railway tunnel style, under Tunnel Settings, specify the height and thickness of the tunnel wall, and the materials for the tunnel ceiling top, ceiling bottom, and inner and outer walls.