To Specify an Incremental, Maximum, or Minimum Values for Parameters

This procedure is used only for linear, polar, XY, or rotation parameters in a dynamic block.

1. If the Properties palette is not displayed, click View tab Palettes Properties. At the Command prompt, enter PROPERTIES.
2. Click Insert tab Block Definition panel Block Editor.At the Command prompt, enter BEDIT.
3. In the Edit Block Definition dialog box, select the block whose parameter values you want to modify.
4. In the Block Editor drawing, click the icon for a linear, polar, XY, or rotation parameter.
5. In the Properties palette, under Value Set, select Increment in the drop-down list next to one of the following items:
   • Dist type
   • Ang Type
   • Hor Type
   • Ver Type
6. Enter an incremental value for the parameter next to the Dist, Ang, Hor, or Ver Increment value set.
7. Enter a minimum value for the parameter next to Dist, Ang, Hor, or Ver Minimum.
8. Enter a maximum for the parameter next to Dist, Ang, Hor, or Ver Maximum.
9. Click Block Editor tab Open/Save panel Save Block.At the Command prompt, enter BSAVE.
10. (Optional) If you are finished using the Block Editor, click Close Block Editor.