SNAP (Command)

Snap Spacing

Activates Snap mode with the value you specify.

On

Activates Snap mode using the current settings of the snap grid.

Off

Turns off Snap mode but retains the current settings.

Aspect

Specifies different spacing in the X and Y directions.

Legacy

Specifying Yes results in legacy behavior. The cursor snaps to the snap grid at all times.

Specifying No results in modern behavior. The cursor snaps to the snap grid only when an operation is in progress.

Style

Specifies the format of the snap grid, which is Standard or Isometric.

Isometric

Sets an isometric snap grid, in which the snap locations are initially at 30-degree and 150-degree angles. Isometric snap cannot have different Aspect values. The lined grid does not follow the isometric snap grid.

ISOPLANE determines whether the crosshairs lie in the top isometric plane (30- and 150-degree angles), the left isoplane (90- and 150-degree angles), or the right isoplane (30- and 90-degree angles).

Type

Specifies the snap type, polar or rectangular. This setting is also controlled by the SNAPTYPE system variable.

Polar

Sets the polar angle increment. (POLARANG system variable)

Grid

Sets the snap to Grid. When you specify points, the cursor snaps along vertical or horizontal grid points.