Creates a parallel surface a specified distance from the original surface.
Summary
Reverse the direction of the offset with the Flip Direction option.
List of Prompts
The following prompts display.
-
Specify Offset Distance
-
Specifies the distance between the offset surface and the original surface.
-
Flip Direction
-
Reverses the offset direction shown by the arrows.
-
Both Sides
-
Offsets the surface in both directions (creates two new surfaces in instead of one).
-
Solid
-
Creates a solid from the offset. This is similar to the THICKEN command.
-
Connect
-
Connects multiple offset surfaces, if the original surfaces are connected.
-
Expression
-
Enter a formula or equation to specify the distance of the surface offset. See Constrain a Design with Formulas and Equations.
