To Work With Chamfering Polylines

2013-04-10

Product Documentation

Intermediate

Chamfer an Entire Polyline

Click Home tabModify panelChamfer.At the Command prompt, enter CHAMFER.
Enter p (Polyline).
Select the polyline.
The polyline is chamfered using the current chamfer method and the default distances.

Close an Open Polyline With a Chamfer

Home Modify Chamfer. At the Command prompt, enter CHAMFER.
Select the first open polyline segment.
Select the second open segment on the same polyline.
The polyline is closed using the current chamfer angle.

Was this information helpful?

Yes
No