CENTERMARK (Command)

Creates an associative, cross-shaped mark at the center of a selected circle or arc.

Access Methods

Tool Set: Drafting tab > Draw panel > Centerline drop-down > Center Mark.

Menu: Draw > Center Mark.

The CENTERMARK command automatically repeats after you select a circle or an arc.

The following prompt is displayed.

Select Circle or Arc: Specifies circles or arcs for drawing of center marks. You can add a center mark to one or more circles or arcs within the command duration.
Layer: Assigns new center marks to the specified layer, overriding the current layer. Enter Use Current or "." to use the current layer. (CENTERLAYER system variable)

Was this information helpful?

Yes
No