- Click
.
- Select the edge of the base surface to chamfer.
One of two surfaces adjacent to the selected edge is highlighted.
- Do one of the following:
- To select a different surface, enter n (Next).
- To use the current surface, press Enter.
- Specify the base surface distance.
The base surface distance is measured from the selected edge to a point on the base surface. The other surface distance is measured from the selected edge to a point on the adjacent surface.
- Specify the location of the chamfer using one of the following options.
- To specify an individual edge, select the edge.
- To select all edges around the base surface, enter l (Loop). Specify an edge.
- To complete the chamfer, press Enter.