-
Click
. Find
- In the Content panel, locate the screw to insert.
- For example, ISO Fasteners Screws and Threaded Bolts Hex Head Types ISO 4014 (Regular Thread).
- For example, ISO Fasteners
- In the Details panel, click Top View.
- In the drawing area, specify the insertion point for the screw.
- On the command line, specify the rotation angle or press Enter to accept the default (zero).
- In the Nominal Diameter dialog box, select the screw size, and then click Next.
- In the Length Selection dialog box, select the length of the screw.
- Click Finish.
Note: All standard content is inserted in the same way. The insertion prompts and dialog boxes may differ depending on the inserted content, but the process is the same.