To Edit Ceiling and Floor Surfaces

Use this procedure to edit the ceiling and floor surfaces of a space.

1. Open the Space/Zone Manager.
2. Verify that Show Space Surfaces is selected.
3. If necessary expand the tree view to display the ceiling and floor surfaces you want to edit.
   
4. Select the ceiling surface of a space in the tree view, and make the necessary changes on the right:

   If you want to…	Then…
   change the name of the ceiling	enter a new value for Name.
   change the ceiling type	for Type, select one of the following: Ceiling Roof Underground ceiling
   change the assigned roof slab style of the ceiling	for Style, select a slab or roof slab style from the drop-down list.

5. Select the floor of a space in the tree view, and make the necessary changes on the right:

   If you want to…	Then…
   change the name of the floor	enter a new value for Name.
   change the floor type	for Type, select one of the following: Interior Floor Raised Floor Slab on Grade Underground Slab
   change the assigned slab style of the floor	for Style, select a slab style from the drop-down list.

6. To add an opening to a ceiling or floor, select the ceiling or floor in the tree view, right-click, and click Add Opening.
7. To remove an opening from a ceiling or floor, select the opening in the tree view, right-click, and click Remove Opening.
8. Click OK.