Change the panel and circuits devices are attached to.
To change the circuit a device is assigned to
- Open the drawing with the devices to reassign.
Note: The drawing must be associated with an Electrical Project Database (.epd) file.
- Enter CIRCUITASSIGN in the command line, select the devices and press Enter.
If you want to... Then... assign the device/s to another circuit within the same panel enter the circuit number. assign the device/s to a circuit in another panel enter p to show all the panels and circuits in them. Specify the "panel name", to switch to that panel, and enter a circuit name under the panel. Note: If the circuits are overloaded, do not match the device type, or the circuit number in the new panel, then the devices will not be reassigned.assign the devices to a new panel enter CIRCUITMANAGER on the command line, and in the left pane of the Circuit Manager, create a new panel and assign circuits to it. Go to step 2 and follow the procedure.
To change the panel a device is assigned to
- Open the drawing with the devices to reassign.
Note: The drawing must be associated with an Electrical Project Database (.epd) file.
- Enter PANELASSIGN in the command line, select the devices and press Enter.
- Enter the "Panel Name" you want to reassign the devices to, and press Enter.
If the panel name is correct, a corresponding circuit exists in the panel, and the circuits matches the device types selected, devices are reassigned to the panel.