Creates additional instances of the selected pipe, including its properties.
Pipeaddselected command allows quick creation of similar pipe objects. You can optionally tweak the properties of the added pipes.
The following prompts are displayed.
- Start point
-
Specify a point to draw the pipe.
- Routing Preference
-
Specify the routing preference of the object.
- System
-
Specify the system name.
- Size
-
Specify the nominal size of the object.
Note: The list includes available sizes common to the pipes and fittings specified in the current routing preference. You can optionally lock this property. Locking the nominal size prevents an accidental change to sizing values when you are modifying the pipe routing. - Lock Size
-
Specify whether or not to lock the nominal size of an existing pipe or fitting. (Unlocked by default).
- Tolerance [on/off]
-
Toggles the fitting tolerance. This will turn on or off the angle of deflection at the joints.
- Elevation
-
Specify the elevation above or below the XY plane of the object.
- Justification
-
Specify the justification setting for a pipe segment.
- Compass
-
Specify whether to enable or disable the compass.
- Plane
-
Specify the justification setting for a pipe segment.
- Rotate
-
Specify the rotation for the angle.
- Slope
-
Specify pitch of the drawn segment.
- Match
-
Specify pipe to match.
- Preferences
-
Opens Pipe Layout Preferences dialog box.