Use this dialog box to select the alignments and specify station ranges for the Incremental Station report.
This report lists northing, easting, and tangent information for a range of alignment stations, based on a specified station increment.
List of Alignments
- Include
-
Specifies the alignments to include in the report. Select a check box to include the alignment.
- Name & Description
-
Displays the name and description of the alignments in the drawing.
- Station Start & Station End
-
Displays the start and end stations for a selected alignment
You can edit these values by highlighting an alignment in the list and adjusting the Report Settings (see below).
Report Settings
- Start Station & End Station
-
Displays the start and end stations for a highlighted alignment. Click an alignment name in the list to highlight it.
You can edit these values to change the range of stations included in the report. You can enter formatted or unformatted values, such as 2+50.95 or 250.95.
- Station Increment
-
Specifies the station increment to use. For example, specify 50 to report at increments of 50 feet or meters along the alignment.
Note:The increment is applied to all alignments. Station 0+00 is always included in the report. Odd stations are not included if they do not match the station increment. For example, if the increment is 50, and the alignment starts at station -10+00, the report will begin at station 0+00. However, if the alignment begins at station -60+00, the report will begin at station -50+00.
- Save Report To
-
Specifies the name and location of the resulting report.
- Create Report
-
Generates the report and saves it to the specified location.
- Done
-
Closes the dialog box and discards changes to station ranges.