To Modify the Elevation of Points at the Survey Command Line

To modify the elevation of a single point

1. In Toolspace, on the Survey tab, right-click the network that you want to edit, and click Survey Command Window.
2. At the Command line, enter:

   MOD ELEV [point 1] (elevation)

To modify the elevation of a multiple points

1. In Toolspace, on the Survey tab, right-click the network that you want to edit, and click Survey Command Window.
2. At the Command line, enter:

   MOD ELEVS [point 1] [point 2] [elevation]

To modify point elevation by an increment

1. In Toolspace, on the Survey tab, right-click the network that you want to edit, and click Survey Command Window.
2. At the Command line, enter:

   MOD ELEV BY [point 1] (amount)

   or

   MOD ELEVS BY [point 1] [point 2] (amount)

Example

This example modifies the elevation of point 2 from 33.528 to 32.004 and then increases the elevation of point 2 by an increment of 10.0. Elevations are in the current units, unless you type a qualifying suffix:

NEZ 1 100 100 30.480

NEZ 2 200 200 33.528

MOD ELEV 2 32.004

! POINT 2 ELEVATION: 32.004

MOD ELEV BY 2 10.0

! POINT 2 ELEVATION ADDED: 42.004

Command Syntax

MOD ELEV [point 1] (elevation)

or

MOD ELEVS [point 1] [point 2] [elevation]

or

MOD ELEV BY [point 1] (amount)

or

MOD ELEVS BY [point 1] [point 2] (amount)