Acceleration Specifies whether to use software or hardware acceleration in 3D. Hardware Specifies hardware acceleration.

I have read tons and tons of posts on other forums about the requirements and a person sure can go down a dark rabbit hole trying to figure out the best setup.

The Graphics Hardware Acceleration tuner log changes to not meeting the minimum requirements after some time in AutoCAD-based product.

Checking the best system hardware to run a specific Autodesk product: Visit the System Requirements page for the specific Autodesk product.

Certified graphics hardware Each of the hardware vendors listed on Certified Graphics Hardware has tested Autodesk products to verify that their hardware supports the product features, and the results have been reviewed by Autodesk product teams.

Overall performance depends on drawing complexity and hardware setup. To learn more about system requirements for Civil 3D see article: System requirements for Autodesk Civil 3D 2021.

The following table outlines the hardware and software requirements if you're running on a system installed with a 64-bit environment.

The performance for importing or working with the huge point clouds and using basic commands like ZOOM, PAN, or 3D Orbit is bad in AutoCAD Products. Hardware Size of the point cloud Improve the hardware Recommendations about hardware requirements for projects for AutoCAD Plant 3D System requirements for AutoCAD Work with the point cloud Change the point cloud file type: Open the RCP-file in ReCap.

Verify that system requirements are met. See System requirements for AutoCAD and Toolsets.

Verify the graphics card meets recommended system requirements for the version of AutoCAD in use (see, System requirements for AutoCAD and System requirements for AutoCAD L).

System requirements for AutoCAD 2025 including Specialized Toolsets Version 2026 and newer It is supported: System requirements for AutoCAD 2026 including Specialized Toolsets Version 2025 and prior Install version 2026 of your AutoCAD product.

See Autodesk System requirements Certified graphics hardware .

Graphic card missing driver updates. Hardware acceleration is off. Using a graphics card that does not meet AutoCAD's system requirements .

Try one or more of the following solutions to prevent Hardware Acceleration from turning off: Hardware Acceleration may be unavailable At times, Hardware Acceleration in AutoCAD may be unavailable or disable on its own.

Follow these steps: Hardware : Recommendations about hardware requirements for projects for AutoCAD Plant 3D Complexity of STEP-file equipment: How to include Inventor content for AutoCAD Plant 3D ArticleId:kA93g000000PHP3 ArticleNumber:000453314