Setting Up and Working with Survey Data

The following example is based on a case study conducted using Trimble and Leica survey data collection equipment. A small site survey was performed to demonstrate that raw survey data from equipment providers can be converted and imported into AutoCAD Civil 3D. These companies, and others, directly support AutoCAD Civil 3D and demonstrate an advantage that AutoCAD Civil 3D has by using the field book file data format.

This section describes best practices for preparing to import survey data into AutoCAD Civil 3D. For more information about Survey Field to Finish, see Survey Field to Finish in the Help system. The basic recommended sequence is as follows:

1. Create a code set list in each controller to collect data in a consistent manner. Use a single coding standard such as the codes shown here that were used to code the sample field data.

   Entity	Code
   Station	STN
   Football pitch	FP
   Bank Bottom	BB
   Building	BG
   Drop Kerb	DK
   Electricity Pole	EP
   Fence	FE
   Gate	G
   Gulley	GU
   Hedge	HE
   Inspection Cover	IC
   Kerb	K
   Lamp Post	LP
   Manhole	MH
   Manhole-Rectangular	MHRECT
   Marker	MK
   Overhead Wire	OHW
   Post	PO
   Spot Level	SL
   Steps	STEP
   Tank	TA
   Text	TXT
   Tree	TE

2. During the field survey data collection, use the coding convention previously established in an AutoCAD Civil 3D Linework Code Set. For example, it is recommended that the linework command code come after the linework feature name, such as "OHW B", where OHW is the figure name, and B is the begin code defined in the Linework Code Set that will be used when the data is imported into AutoCAD Civil 3D.

   If your data collector does not support the use of a Linework Code Set, then a convention such as the figure command BEG is used to indicate the beginning of a figure line, such may be the case with some data collection conversion tools that do not support the new Field to Finish features of AutoCAD Civil 3D 2010.

   Inserting a figure command into the point description during the survey data collection phase of a project automates the process of creating line work when the data is later imported into AutoCAD Civil 3D 2010.

3. Use the Edit Linework Code Set dialog box, as shown in figure 1, to specify coding methods and to edit special codes, line segment codes, and curve segment codes.
   

   Figure 1: Specify coding methods for consistency

   Note

   It is recommended that you use <space> as the Field/Code Delimiter Property value.

4. Use the Description Key editor, as shown in figure 2, to create a suitable description key set to match these codes to style points, label descriptions, and elevations accordingly.
   

   Figure 2: Create description keys editor

5. Use the Figure Prefix Database Manager, as shown in figure 3, to create a figure prefix library and figure styles with which to receive the linework codes and draw the linework in a suitable style.
   Note

   You should only specify a site if the Lot Line property is set.

   

   Figure 3: Specify how imported line work is drawn

   You can specify whether the linework is drawn as breaklines or lot lines, as well as the assigned layer, style, and site.

   

   Figure 4: Aerial photo of the site survey field

   The following two steps in this workflow illustrate the results of importing and working with the sample survey data. The example in this workflow is the field shown in figure 4.

6. Import the survey data. The results after importing the survey data into AutoCAD Civil 3D are shown in figure 5.
   

   Figure 5: Imported survey data

7. Create a surface from breaklines and point groups. Then specify a contour style as shown in figure 6.
   

   Figure 6: Surface created from breaklines and point groups with specified contour style

   This completes the survey field to finish workflow.