This tutorial demonstrates how to grade around a building footprint that has relatively complicated geometry and variations in elevation.
The drawing used in this tutorial contains a surface and a building pad that consists of two tiers connected by a small ramp. The elevation of the top portion of the building pad is 402 feet, and the bottom portion is 400 feet.
Projection grading, also known as slope grading, involves projecting a slope from a feature line to a specified target. Projection grading targets include an intersection with a surface, or a specified distance, elevation, or elevation difference. The ramp that connects the two tiers consists of arcs and inside corners, both of which complicate a grading plan. Simply applying projection grading, which was demonstrated in the Creating a Grading exercise, would result in a grading that overlaps itself.
In this tutorial, you will learn how to create a successful grading solution for similarly complicated scenarios. After you have completed this tutorial, proceed to the Using Feature Lines to Modify a Grading tutorial to learn how to modify the grading solution, using the AutoCAD Civil 3D feature line editing tools.
For more information, see the AutoCAD Civil 3D Help topic Creating Grading.
Topics in this section
- Exercise 1: Simplifying a Building Footprint
In this exercise, you will use the feature line stepped offset command to generate a simplified footprint from which to grade.
- Exercise 2: Grading from a Building Footprint to a Surface
In this exercise, you will grade from the simplified, offset footprint to the existing ground surface.
- Exercise 3: Filling Holes in a Grading
In this exercise, you will create infill gradings to fill in the open areas inside the grading group.