Use this dialog box to review or edit many alignment details such as the name, design speeds, and label sets.
Some of the tabs on this dialog box are conditional, subject to alignment type. For example, the Curb Return Parameters tab appears only for curb return alignments.
See Also
Topics in this section
- Information Tab (Alignment Properties Dialog Box)
Use this tab to change the alignment name, description and alignment style information, and to review details, such as when the style was most recently modified.
- Station Control Tab (Alignment Properties Dialog Box)
Use this tab to establish the Station Reference Point and assign station equations along the alignment.
- Masking Tab (Alignment Properties Dialog Box)
Use this tab to suppress the display of an alignment and its labels for a range of stations.
- Point of Intersection Tab (Alignment Properties Dialog Box)
Use this tab to specify the display of implied points of intersection, where the PI is not defined by two fixed tangents.
- Constraint Editing Tab (Alignment Properties Dialog Box)
Use this tab to affect the behavior of the Tangency Constraint (Not Constrained, Constrained by Previous, Constrained by Next, and Constrained on Both Sides) and Parameter Constraint (Radius, Length, Pass Through Point, etc.) while the alignment is edited.
- Design Criteria Tab (Alignment Properties Dialog Box)
Use this tab to establish the design criteria, including speeds along the length of the alignment.
- Profiles Tab (Alignment Properties Dialog Box)
Use this tab to view data about a profile associated with the alignment.
- Profile Views Tab (Alignment Properties Dialog Box)
Use this tab to view data about a profile view.
- Offset Parameters Tab (Alignment Properties Dialog Box)
For a dependent offset alignment, use this tab to set properties of the offset.
- Curb Return Parameters Tab (Alignment Properties Dialog Box)
For a curb return alignment, use this tab to review and edit design data.
- Rail Parameters Tab (Alignment Properties Dialog Box)
Use this tab to specify parameters that are specific to Rail alignments.