Point Information Commands

2012-03-14

Product Documentation

Intermediate

The following table lists the point information-related AutoCAD Civil 3D survey commands and briefly describes their functionality.

Note

These commands must be entered in the Survey Command Window. For more information, see Survey Command Window.

Command	Description
A [point 1] [point 2] [point 3]	Lists the horizontal angle between points
AZ [point 1] [point 2]	Lists the azimuth between two points
B [point 1] [point 2]	Lists a bearing between two points
D [point 1] [point 2]	Determines the distance between two points
DISP PTS (point 1) (point 2)	Displays point information
GRADE [point 1] [point 2]	Lists the grade between two points
INV PTS [point 1] [point 2]	Lists the direction and distance between points
INVERSE RADIAL [backsight] [station]	Lists the angle and distance from a setup in a radial direction from the backsight point
SLOPE [point 1] [point 2]	Lists the slope angle between two points
SD [point 1] [point 2]	Lists the slope distance between two points
VD [point 1] [point 2]	List the elevation distance between two points