Widenings

You can apply widening for a specified length along an alignment.

Each widening includes transition regions at the entry and the exit. In the figure, region 1 is the entry transition, and region 3 is the exit transition, based on the direction of the centerline alignment. Default values for the length and shape of these transitions are determined by command settings for the AddWidening command.

The transitions extend forward and back from the specified widening start and end stations. In the example shown, the widening starts at station 3+00 and the transition length is 75, so the entry transition starts at 2+25.

Curb return alignments in intersections can be edited to add widenings at one or both ends. This type of widening typically forms a turn lane at the entry to a curb return or a merge lane at the exit from a curb return.

You can also add automatic widening to dynamic offset alignments. For more information, see Adding Automatic Widening.

In the command settings for alignment commands, you can configure a variety of options to control default behavior for how widenings and transitions are created in widening situations. For example, on the AddWidening command, you can configure the default settings for how the Linear Transition Around Curves option creates linear transitions in widening situations. For more information, see Edit Feature Settings - Alignment dialog box.