Use the Pipe Properties dialog box and the Structure Properties dialog box to view or edit properties associated with any given pipe network part.
Part properties define a variety of characteristics of the part, including the part family the part belongs to, a part type, and properties defining the part’s size, shape, elevation, automatic resizing behaviors, and other behaviors. Part properties originate from definitions of the part in the part catalog.
After you insert a part into a drawing, you can edit many of its properties. Those changes apply only to the currently selected part in the drawing. For example, once you add a structure, such as a manhole, to a drawing, you can change the structure’s inside diameter by editing the value for the Inner Structure Diameter property, in the Part Data collection, on the Part Properties tab. The default value for the structure’s Inner Structure Diameter property that is maintained in the part list (or the part catalog) is not affected.
Part properties are organized into the following categories:
Category |
Description |
|---|---|
| General | These properties specify the surface and alignment referenced by the part. For pipes, there are properties that specify flow direction. For structures, the structure elevation at its insertion point is specified. |
| Geometry | For pipes, these properties specify general characteristics of the pipe, such as the flow direction method, flow direction, and the surface and alignment referenced. For structures, these properties specify characteristics such as the structure’s rotation angle, offset, station data, and the number of pipes that are currently connected to the structure. |
| Resize Behavior | The resize behavior property is specific to pipes. It specifies the behavior that occurs when the pipe is automatically resized. You can choose to have the pipe hold to its crown, invert, or centerline elevation when it is resized. |
| Hydraulic Properties | For both pipes and structures, these properties specify hydraulic information, such as hydraulic grade lines and energy grade lines, the pipe network may have received from the Storm Sewers Extension. For more information, see Adding Hydraulic Property Data to AutoCAD Civil 3D Pipe Networks. |
| Insertion (Rim) and Sump Behavior | These properties are associated with junction structures only. They specify the structure’s insertion point (structure rim) and sump elevation and adjustment behavior. |
| Part Data | For both pipes and structures, these properties specify a variety of part characteristics, such as part type, part subtype, and the part size name as defined in the part catalog. Some of these properties define the part’s basic primitive shape and behavior, and therefore are read-only. |
The Pipe Properties and the Structure Properties dialog boxes have the following tabs:
- Information. Specifies the name, description, object style, and object render material assigned to the pipe or structure object.
- Part Properties. Displays a list of properties that exist for this part. These properties define the basic size and shape of the part, as well as the part family the part belongs to. This section also specifies hydraulic properties for the pipe network, if they exist. You can edit values for certain properties on this tab.
- Rules. Displays a list of the rules that are associated with the part. These rules originate from the default rule of the part in the part catalog. You can edit the part’s rules once you have inserted the part into a drawing. Rules are used to validate certain properties of the part, and also to determine elevation during layout, and during certain editing commands.
The Structure Properties dialog box has the following additional tab for viewing data about pipes connected to the structure:
- Connected Pipes. Displays a list of each pipe connected to the structure, and property values for each pipe. You can edit values for certain properties, such as elevation data, on this tab. It’s very useful for quickly editing elevations, slopes, diameters or descriptions for multiple pipes connected to a structure.
See Also
To edit pipe or structure properties
- Right-click a pipe or structure in the drawing. Click either Pipe Properties or Structure Properties.
- In either the Pipe Properties or the Structure Properties dialog box, click the Part Properties tab.
- Click a property value, edit it, and click Apply or OK to save changes.
For example, to change the inner diameter of a structure, scroll to the Part Data property group, click the value for the Inner Structure Diameter property, and select a new value.
- Click Apply or OK to save changes.
For more information, see Part Properties.
To edit pipe or structure rules
- Right-click a pipe or structure in the drawing. Click either Pipe Properties or Structure Properties.
- In either the Pipe Properties or the Structure Properties dialog box, click the Rules tab.
- Click the desired property value in the Value column, enter a new value, and press Enter.
- Click Apply or OK to save changes.
For more information, see Part Rules.