Share

Adding a Corridor Slope Pattern

Product Documentation
Intermediate
View Original

Add slope patterns to corridor surfaces.

To add a corridor slope pattern using the Corridor Properties dialog box

  1. In Toolspace, on the Prospector tab, expand Corridors, right-click the corridor, and click Properties.
  2. In Corridor Properties dialog box, click the Slope Patterns tab.
  3. Click Add Slope Pattern >>.
  4. In the drawing, select the first corridor feature line that will form one side of the slope. If you make an ambiguous selection, the Select A Feature Line dialog box is displayed. Select a feature line from the list.
  5. Select the second corridor feature line that will form the other side of the slope. If you make an ambiguous selection, the Select A Feature Line dialog box is displayed. Select a feature line from the list.
  6. Click Apply.

To add a corridor slope pattern using the ribbon

  1. In the drawing, click the corridor.
  2. Click Corridor tabModify Corridor panelSlope Patterns.
  3. Click Add Slope Pattern >>...
  4. In the drawing, select the first corridor feature line that will form one side of the slope. If you make an ambiguous selection, the Select A Feature Line dialog box is displayed. Select a feature line from the list.
  5. Select the second corridor feature line that will form the other side of the slope. If you make an ambiguous selection, the Select A Feature Line dialog box is displayed. Select a feature line from the list.
  6. Click Apply.

Ribbon

Corridor tab Modify Corridor panel Slope Patterns

Toolspace Context Menu

Prospector tab: Corridors <corridor name> PropertiesSlope Patterns tab

Object Context Menu

Corridor Properties

Dialog Box

Corridor Properties - Slope Patterns tab

Define Slope Patterns Dialog Box


Was this information helpful?