Design Criteria Tab (Create Profile - Draw New Dialog Box)

Alignment

Specifies the horizontal alignment along which to create the profile.

Name

Specifies the name of the profile. Each profile must have a unique name.

Description

Specifies an optional description of the profile.

Use Criteria-Based Design

Specifies whether to apply design criteria to the profile. If this check box is cleared, then the Use Design Criteria File and Use Design Check Set options are not available.

Use Design Criteria File

Use Design Criteria File

Specifies whether to associate a design criteria file with the profile. If this check box is cleared, then the design criteria file selector and Default Criteria table are not available.

For more information, see Profile Design Criteria Tables.

Design Criteria File Selector

Specifies the design criteria file to associate with the profile. The design criteria file that is applied to the parent alignment is displayed by default. Click to select another design criteria file.

Default Criteria Table

Displays the profile standards formulas that are defined in the selected design criteria file. Click the Value column to change a criteria table.

Use Design Check Set

Use Design Check Set Check Box

Specifies whether to associate a design check set with the profile. If this check box is cleared, then the Design Check Set list is not available.

For more information, see Working with Design Check Sets.

Design Check Set List

Displays the default design check set. You can either accept the default design check set, or use the list to select a different one from the drawing.

Design Check Set Selection

Edits or copies the current design check set, or creates a design check set.