Share

Editing Pipes Connected to Structures

Product Documentation
Intermediate
View Original

You can use the Connected Pipes tab on the Structure Properties dialog box to quickly edit pipes connected to a single structure.

When you have pipes connected to a structure, you may need to adjust the values of properties such as elevation, and or pipe diameter/width. To do this, you can use the Connected Pipes tab on the Structure Properties dialog box to edit the properties of multiple pipes connected to the same structure.

Using this tab, you can

  • edit inner diameter, inner width, or inner height of pipes connected to a structure
  • quickly edit elevations on multiple pipes to match the elevation of a selected pipe

To edit pipes connected to a structure

  1. In the drawing, right-click the structure you want to edit, and then select Structure Properties from the context menu.
  2. Click the Connected Pipes tab.
  3. To edit the following properties, click the value in the cell and enter a new value, or select one from the list: inner diameter (for circular pipes), inner width or inner height (for non-circular pipes).
    Note

    On this tab, the read-only slope value refers to the slope of the pipe as it is coming out of the structure (slope out).

  4. To edit the elevation for a single pipe, select the pipe and edit the invert, centerline, or crown elevation value.
  5. To edit elevations for multiple pipes, see for Matching Elevations on Connected Pipes more information.
  6. Click Apply to make the changes, or click OK to make the changes and close the Structure Properties dialog box.

Was this information helpful?