If a region has an assembly offset specified, you can edit the alignment, profile, and station start and end for the offset.
For information, on assembly offsets, see Creating an Assembly Offset.
To edit an offset alignment for a region
- In the drawing, click the corridor, then right-click and click Corridor Properties.
- In the Corridor Properties dialog box, click the Parameters tab.
- To change the alignment for the offset, click the Alignment field. Select the alignment in the Pick Horizontal Alignment dialog box.
- To change either the start or end station for the region, select either the Start Station or End Station field. Enter the station number or click
and select the station in the drawing. - Click Apply.
