When creating a feature line you can manually enter an elevation or assign an elevation from a surface or from grading objects when creating a feature line from objects.
Tutorial Exercise: Creating Feature Lines
To manually assign feature line elevations
- Click Home tab
Create Design panelFeature Line drop-downCreate Feature Lines From Objects
.At the Command prompt, enter CreateFeatureLines. - In the Create Feature Lines dialog box, select the Assign Elevations check box and press OK.
- In the Assign Elevations dialog box, enter an elevation in the edit box select the Elevation option and press OK. If the object is a 3D polyline with varying elevations, the first point is set to the specified elevation and the rest of the points are raised/lowered by the same relative amount so that the elevation differences between the points remain.
To assign feature line elevations from a surface
- Click Home tabCreate Design panelFeature Line drop-downCreate Feature Lines From Objects.At the Command prompt, enter CreateFeatureLines.
- In the Create Feature Lines dialog box, select the Assign Elevations check box and press OK.
- In the Assign Elevations dialog box, select the From Surface option.
- Select a surface from the list or click the arrow icon to select it in the drawing.
- Select the Insert Intermediate Grade Break Points check box to insert intermediate grade breaks where the entity crosses surface TIN lines. Additional elevation points are created at these locations.
To assign feature line elevations from a grading in the current site
- Click Home tabCreate Design panelFeature Line drop-downCreate Feature Lines From Objects.At the Command prompt, enter CreateFeatureLines.
- In the Create Feature Lines dialog box, select the Assign Elevations check box.
- Select the From Gradings option. This option is similar to the From Surfaces option but acquires the elevations directly from any gradings that it overlaps in the site that the feature line is to be created in.
- Select the Insert Intermediate Grade Break Points check box to insert intermediate grade breaks where the entity crosses surface TIN lines. Elevation points are created at these locations.