Add additional baselines to a corridor to create offset alignments.
Typically, you need to add additional baselines if you require offsets or more complex corridor models, such as ones with intersections.
To add baselines using the ribbon
- In the drawing, click the corridor.
- Click Corridor tab
Modify Corridor panelAdd Baseline
. - In the Create Corridor Baseline dialog box, specify a baseline name.
- Specify a horizontal alignment by selecting one from the drop-down list, or click
to select a baseline in the drawing. - Click OK.
- On the Select a Profile dialog box, specify a profile by selecting one from the drop-down list, or click to select a baseline in the drawing.
- Click OK.
To add baselines using the Corridor Properties dialog box
- In the drawing, click the corridor, then right-click and click Corridor Properties.
- In the Corridor Properties dialog box, click the Parameters tab.
- To add a new baseline, click Add Baseline.
- In the Pick Horizontal Alignment dialog box, select the alignment from the list or click to select an alignment in the drawing.
- To select the profile for the baseline, click the Profile field. Select the profile from the list or click to select a profile in the drawing.
- To add a region to the baseline, right-click the baseline. Click Add. For information, see Adding and Editing Corridor Regions.
- Click Apply.