Add a fixed curve through three specified pass-through points.
These commands are similar to an AutoCAD arc, but have a third point along the arc.
Topics in this section
- Adding a Fixed Curve with Three Points
Add a fixed three-point curve by specifying three points.
- Adding a Fixed Curve with Two Points and a Direction at First Point
Add a fixed three-point curve defined by specified start and end points and a direction at the start point.
- Adding a Fixed Curve with Two Points and a Direction at Second Point
Add a fixed curve defined by specified start and end points and a direction at the end point.
- Adding a Fixed Curve with Two Points and Radius
Add a fixed curve defined by specified radius, direction, and start and end points.
- Adding a Fixed Curve from an Entity End to a Through Point
Add a fixed curve from the end of an existing entity to a specified end point
- Adding a Fixed Curve from Center Point with Radius
Add a full, fixed circle defined by a specified center point, direction, and radius.
- Adding a Fixed Curve with a Center Point and Through Point
Add a full, fixed circle defined by a specified center point, direction, and pass-through point.
- Adding a Fixed Curve with a Through Point, Direction at Point, and Radius
Add a full, fixed circle defined by a specified pass-through point, direction at the pass-through point, curve direction, and radius.
- Adding a Fixed Curve by Best Fit
Add the most probable fixed curve through a series of AutoCAD Civil 3D points, AutoCAD points, existing entities, or clicks on screen.