You can specify a point location using grid northing and easting values.
Grid settings are required in the drawing, including the zone, the coordinate system, and any applied transformations.
Transformation settings for the drawing may include a base point, a rotation angle, or another reference point.
A transparent command can only be used within a running command.
To specify a point location by grid northing and grid easting
- When you are prompted to enter a point in a command, do one of the following:
- Enter 'gn.
- Activate the Transparent Commands toolbar and select
.
- Enter a grid northing value.
- Enter a grid easting value.
- If you are prompted, enter an elevation. For more information, see Entering an Elevation for a Transparent Command.
Note
Elevation prompting for transparent commands is controlled by the Transparent Command setting Prompt For 3D Points. For more information, see Transparent Command Settings.
