Use the parameters shown in this topic to use the LaneSuperelevationAOR subassembly to build an undivided crowned roadway assembly with axis of rotation pivot points.
For best results, compose each side of the the assembly as a separate group.
The parameters in the following table must be set as shown for each corresponding LaneSuperelevationAOR subassembly. The other lane subassembly parameters do not affect the axis of rotation pivot points.
NoteThe Mirror Subassemblies command affects only the Side parameter of the subassembly. If you mirror the subassembly, you must set the Use Superelevation Slope and Slope Direction parameters manually.
NoteThe Mirror Subassemblies command does not affect the Use Superelevation and Slope Direction parameters. These parameters must be set manually after a subassembly has been mirrored.
| 1 | 2 | |
|---|---|---|
| Use Superelevation | Left Lane Outside | Right Lane Outside |
| Slope Direction | Away from Crown | Away from Crown |
| Potential Pivot | Yes | Yes |