You can use the Point Information commands to list angle, distance, and bearing information about the points that exist in the survey database.
Topics in this section
- Listing the Horizontal Angle Between Points
Display the angle between any three points in the survey database. You must specify a backsight point, instrument point, and ahead point.
- Listing the Bearing Between Two Points
Use the Bearing command to list the bearing from one point to another.
- Listing the Azimuth Between Two Points
You can list the azimuth between two points in the survey database using the Azimuth command.
- Listing the Distance Between Two Points
Use the Distance command to determine the horizontal distance between two points in the survey database.
- Listing the Direction and Distance Between Points
Use the Inverse Points command to determine the direction and distance between two points.
- Listing an Angle and Distance Using the Inverse Radial
You can use the Inverse Radial command to determine the angle and distance from a setup in a radial direction from the backsight point. You must specify a backsight point identifier, an instrument point identifier, and a foresight point.
- Listing the Elevation Distance Between Two Points
Use the Vertical Distance command to determine the elevation difference between two points in the survey database.
- Listing the Slope Distance Between Two Points
Use the Slope Distance command to determine the slope distance between two points.
- Listing the Grade Between Points
Use the Grade command to determine the grade between two points. You must specify a starting point and an ahead point.
- Listing the Slope Angle Between Existing Points
Use the Slope Angle command to determine the slope angle between two points.