The following table lists the point creation-related AutoCAD Civil 3D survey commands and briefly describes their functionality.
Note
These commands must be entered in the Survey Command Window. For more information, see Survey Command Window.
Command |
Description |
|---|---|
| AD (point) [angle] [distance] (description) | |
| AD VA (point) [angle] [distance] [vertical angle] (description) | |
| AD VD (point) [angle] [distance] [vertical distance] (description) | |
| AP ON (point) | Turns automatic point numbering on |
| AP OFF | |
| BD (point) [bearing] [quadrant] [distance] (description) | |
| BD VA (point) [bearing] [quadrant] [distance] [vertical angle] (description) | |
| BD VD (point) [bearing] [quadrant] [distance] [vertical distance] (description) | |
| DD (point) [angle] [distance] [vertical angle] (description) | |
| DD VA (point) [angle] [distance] [vertical angle] (description) | Creates a point by deflection angle, distance, and vertical angle |
| DD VD (point) [angle] [distance] [vertical distance] (description) | Creates a point by deflection angle, distance, and vertical distance |
| F1 (point) [angle] [distance] (description) | |
| F1 VA (point) [angle] [distance] [vertical angle] (description) | Creates a point using a FACE 1 angle and a vertical angle |
| F1 VD (point) [angle] [distance] [vertical distance] (description) | Creates a point using a FACE 1 angle and a vertical distance |
| F2 (point) [angle] [distance] (description) | |
| F2 VA (point) [angle] [distance] [vertical angle] (description) | |
| F2 VD (point) [angle] [distance] [vertical distance] (description) | Creates a point using a FACE 2 angle and a vertical distance |
| LAT LONG (point) [latitude] [longitude] (description) | |
| NE (point) [northing] [easting] (description) | |
| NE SS (point) [northing] [easting] (elevation) (description) | |
| NEZ (point) [northing] [easting] (elevation) (description) | Creates a control point using a northing, easting, and elevation |
| PRISM [height] | Changes the current prism height |
| PT OFFSET (point) [offset] (ahead) (description) | |
| SKIP | Skips over the next available point (when automatic point numbering is on) |
| STADIA (point) [angle] [distance] [rod] (vertical angle) (description) | |
| ZD (point) [azimuth] [distance] (description) | |
| ZD [VA] (point) [azimuth] [distance] [vertical angle] (description) | |
| ZD [VD] (point) [azimuth] [distance] [vertical distance] (description) | Creates a point using azimuth, distance, and vertical distance |