Add data bands that display data such as elevations and horizontal geometry.
Place data bands along the top or bottom of a section view grid to annotate the various section lines with elevation data, vertical or horizontal geometry points, superelevation, or pipe network data. You can also group a set of commonly used data bands into a band set that can be applied to a section view as a single selection.
Tutorial: Adding a Data Band to a Section View
See Also
To add bands to a section view
- In the section view, click the section view grid.
- Right-click the section view. Click Section View Properties.
- In the Section View Properties dialog box, click the Bands tab.
- In the List Of Bands area, select either Bottom or Top as the location for the new band in the section view.
- Select a band type and style. Click Add.
- To add more bands to the section view, repeat Steps 4 and 5.
- Optionally, on the right side of the List Of Bands, move selected bands up
or down 
in the stack. To delete any unwanted bands, click 
. - To save this arrangement of bands as a set for reuse, click Save As Band Set.
- Click OK to close the Section View Properties dialog box. The bands are displayed in the section view.
To label corridor lane widths, create a corridor, build a corridor surface using ETW (edge-of-traveled-way) feature lines, and label that surface with an appropriate section segment band. For more information, see Working with Section Views and Understanding Corridor Modeling.
