Define Material Criteria Dialog Box

2012-03-14

Product Documentation

Intermediate

Use this dialog box to define quantity takeoff criteria from a sample line group.

Select Alignment: Specifies the alignment. Click to select an alignment in the drawing.
Select Sample Line Group: Specifies the sample line group to use. Select a group from the list.
Select Surfaces: Displays the available surfaces from which sections are to be cut. Select the check box next to surface to use it to define a criteria material.

Note
At least two surfaces must be selected. Surfaces selected are compared at each station and the enclosed areas at each cross section are added as a material type to the criteria.