You can use the Corridor Section Editor to view and modify corridor sections.
Use the Corridor Section Editor to apply assembly overrides to a corridor section or a range of sections and then view only those sections. To view both the corridor section view and its location along the corridor (1), open two horizontal viewports.
Tutorial: Viewing and Editing Corridor Sections
Topics in this section
- Viewing Corridor Sections
Use the Corridor Section Editor to visually inspect how assemblies are applied at various stations.
- Configuring Viewports in Section Editor
Specify a viewport configuration that is applied each time Section Editor is opened.
- Viewing AutoCAD Civil 3D Objects in Section Editor
Specify the types of AutoCAD Civil 3D objects that are displayed in Section Editor.
- Tracking Corridor Station Relative to Cursor Position
Use the station tracker line to view the station on an alignment, profile, or section relative to the current cursor position.
- Editing Corridor Sections
You can use the Corridor Section Editor to override corridor and assembly parameters and apply the overrides to a station or range of stations.
- Adding A Corridor Section
You can manually add stations in a corridor on any baseline and any region using the Add a Corridor Section command.
- Deleting a Corridor Section
You can manually delete stations in a corridor on any baseline and any region using the Delete a Corridor Section command.