Add a fixed three-point curve defined by specified start and end points and a direction at the start point.
The result is a three-point curve. The specified curve direction (3) determines the location of the pass-through point between the start (1) and end (2) points.
To add a fixed curve (two points and a direction at first point)
- Click the alignment. Click Alignment tab
Modify panelGeometry Editor
. - On the Alignment Layout Tools toolbar, click
Fixed Curve (Two Points And Direction At First Point). - Specify the start point.
- Specify the second point.
- Specify the direction at the start point, or specify either a bearing or azimuth.