Use the parameters shown in this topic to use the LaneSuperelevationAOR subassembly to build an undivided planar roadway assembly with axis of rotation pivot points.
For best results, compose each side of the the assembly as a separate group.
The parameters in the following table must be set as shown for each corresponding LaneSuperelevationAOR subassembly. The other lane subassembly parameters do not affect the axis of rotation pivot points.
NoteThe Mirror Subassemblies command does not affect the Use Superelevation, Slope Direction, and Outside Point Code parameters. These parameters must be set manually after a subassembly has been mirrored.
| 1 | 2 | 3 | 4 | |
|---|---|---|---|---|
| Use Superelevation | Left Lane Outside | Left Lane Inside | Right Lane Inside | Right Lane Outside |
| Slope Direction | Away from Crown | Away from Crown | Away from Crown | Away from Crown |
| Potential Pivot | Yes | Yes | Yes | Yes |
| Outside Point Code | Edge of Pavement (ETW) | None | None | Edge of Pavement (ETW) |